myCNC Online Documentation

This is an old revision of the document!

Variable Name	Variable Address	Comments
GVAR_MODAL_G0_G3	4001	Modal state of G00, G01, G02, G03, G33, G34
GVAR_MODAL_G96_G97	4002	Modal state of G96, G97
GVAR_MODAL_G68_G69	4004	Modal state of G68, G69
GVAR_MODAL_G98_G99	4005	Modal state of G98, G99
GVAR_MODAL_G20_G21	4006	Modal state of G20, G21
GVAR_MODAL_G40_G42	4007	Modal state of G40, G41, G42
GVAR_MODAL_G25_G26	4008	Modal state of G25, G26
GVAR_MODAL_G22_G23	4009	Modal state of G22, G23
GVAR_MODAL_G80_G89	4010	Modal state of G80 - G89
GVAR_MODAL_G66_G67	4012	Modal state of G66, G67
GVAR_MODAL_G54_G59	4014	Modal state of G54-G59
GVAR_MODAL_G17_G19	4016	Modal state of G17-G19
GVAR_TOOL_1_X_CORRECTION	4600	+98
GVAR_TOOL_1_Z_CORRECTION	4700	+98
~~GVAR_RUNNING_STOP~~	4800
~~GVAR_CURRENT_BLOCK_END_POSITION~~	5001	(+8) program position at the end of current block

GVAR_CURRENT_MACHINE_POSITION	5021	(+8) Current position in Machine coordinates 5021 - Machine Position X 5022 - Machine Position Y 5023 - Machine Position Z 5024 - Machine Position A 5025 - Machine Position B 5026 - Machine Position C 5027 - Machine Position U 5028 - Machine Position V 5029 - Machine Position W
GVAR_CURRENT_PROGRAM_POSITION	5041	(+8) Current position in Work coordinates 5041 - Work Position X 5042 - Work Position Y 5043 - Work Position Z 5044 - Work Position A 5045 - Work Position B 5046 - Work Position C 5047 - Work Position U 5048 - Work Position V 5049 - Work Position W
GVAR_OFFSET_G38_PROBE	5061
GVAR_G38_PROBE_RESULT	5070

GVAR_OFFSET_G28	5161	Machine coordinates for G28 Home Position 5161 - G28 X Position 5162 - G28 Y Position 5163 - G28 Z Position 5164 - G28 A Position 5165 - G28 B Position 5166 - G28 C Position 5167 - G28 U Position 5168 - G28 V Position 5169 - G28 W Position
GVAR_OFFSET_G30	5181	Machine coordinates for G30 Home Position 5181 - G30 X Position 5182 - G30 Y Position 5183 - G30 Z Position 5184 - G30 A Position 5185 - G30 B Position 5186 - G30 C Position 5187 - G30 U Position 5188 - G30 V Position 5189 - G30 W Position
~~GVAR_OFFSET_G92~~	5211
GVAR_COORD_SYSTEM_NUMBER	5220	Register keeps Current Coordinates System number 1- G54, 2- G55, 3- G56, 4- G57, 5- G58, 6- G59, 7- G59.1, 8- G59.2, 9- G59.3

GVAR_OFFSET_G54_DATA	5221	(+8) Offsets between Machine and Work coordinates for Coordinates system #1 (G54) #5221 - G54 Offset X, #5222 - G54 Offset Y, #5223 - G54 Offset Z, #5224 - G54 Offset A, #5225 - G54 Offset B, #5226 - G54 Offset C, #5227 - G54 Offset U, #5228 - G54 Offset V, #5229 - G54 Offset W
GVAR_OFFSET_G55_DATA	5241	(+8) Offsets between Machine and Work coordinates for Coordinates system #2 (G55) #5241 - G55 Offset X, #5242 - G55 Offset Y, #5243 - G55 Offset Z, #5244 - G55 Offset A, #5245 - G55 Offset B, #5246 - G55 Offset C, #5247 - G55 Offset U, #5248 - G55 Offset V, #5249 - G55 Offset W
GVAR_OFFSET_G57_DATA	5261	(+8) Offsets between Machine and Work coordinates for Coordinates system #3 (G56) #5261 - G56 Offset X, #5262 - G56 Offset Y, #5263 - G56 Offset Z, #5264 - G56 Offset A, #5265 - G56 Offset B, #5266 - G56 Offset C, #5267 - G56 Offset U, #5268 - G56 Offset V, #5269 - G56 Offset W
GVAR_OFFSET_G57_DATA	5281	(+8) Offsets between Machine and Work coordinates for Coordinates system #4 (G57) #5281 - G57 Offset X, #5282 - G57 Offset Y, #5283 - G57 Offset Z, #5284 - G57 Offset A, #5285 - G57 Offset B, #5286 - G57 Offset C, #5287 - G57 Offset U, #5288 - G57 Offset V, #5289 - G57 Offset W
GVAR_OFFSET_G58_DATA	5301	(+8) Offsets between Machine and Work coordinates for Coordinates system #5 (G58) #5301 - G58 Offset X, #5302 - G58 Offset Y, #5303 - G58 Offset Z, #5304 - G58 Offset A, #5305 - G58 Offset B, #5306 - G58 Offset C, #5307 - G58 Offset U, #5308 - G58 Offset V, #5309 - G58 Offset W
GVAR_OFFSET_G59_DATA	5321	(+8) Offsets between Machine and Work coordinates for Coordinates system #6 (G59) #5321 - G59 Offset X, #5322 - G59 Offset Y, #5323 - G59 Offset Z, #5924 - G59 Offset A, #5325 - G59 Offset B, #5326 - G59 Offset C, #5327 - G59 Offset U, #5328 - G59 Offset V, #5329 - G59 Offset W
GVAR_OFFSET_G591_DATA	5341	(+8) Offsets between Machine and Work coordinates for Coordinates system #7 (G59.1) #5341 - G59.1 Offset X, #5342 - G59.1 Offset Y, #5343 - G59.1 Offset Z, #5344 - G59.1 Offset A, #5345 - G59.1 Offset B, #3426 - G59.1 Offset C, #5347 - G59.1 Offset U, #5348 - G59.1 Offset V, #5349 - G59.1 Offset W
GVAR_OFFSET_G592_DATA	5361	(+8) Offsets between Machine and Work coordinates for Coordinates system #8 (G59.2) #5361 - G59.2 Offset X, #5362 - G59.2 Offset Y, #5363 - G59.2 Offset Z, #5364 - G59.2 Offset A, #5365 - G59.2 Offset B, #5366 - G59.2 Offset C, #5367 - G59.2 Offset U, #5368 - G59.2 Offset V, #5369 - G59.2 Offset W
GVAR_OFFSET_G593_DATA	5381	(+8) Offsets between Machine and Work coordinates for Coordinates system #9 (G59.3) #5381 - G59.3 Offset X, #5382 - G59.3 Offset Y, #5383 - G59.3 Offset Z, #5384 - G59.3 Offset A, #5385 - G59.3 Offset B, #5386 - G59.3 Offset C, #5387 - G59.3 Offset U, #5388 - G59.3 Offset V, #5389 - G59.3 Offset W

GVAR_CHECK_TOOL_MISMATCH	5397
GVAR_CHECK_TOOL_BREAKAGE	5398	A register contains Tool integrity flag. It's supposed a Tool integrity procedure will write “1” to this register is a Tool Breakage is detected. A “0” value is written while the broken tool is replaced.
GVAR_OFFSET_TOOL_PARAMS	5400
GVAR_CURRENT_TOOL_NUMBER	5400	Current Tool Number is stored in this register
GVAR_CURRENT_TOOL_OFFSET	5401	+8 for all axes
	5403	Tool length (in mm) is stored in this register
GVAR_SCHEDULED_TOOL_NUMBER	5409	A Tool number, that going to be next in tool holder. ATC procedure uses both #5400 and #5409 registers to find where to put a current tool and where from to get the new one.
GVAR_CURRENT_TOOL_DIAMETER	5410	The register keeps a diameter of the Current Tool. Register value is updated from Tool table when Current Tool number (#5400) is changed.
GVAR_TOOL_FRONTANGLE	5411	A register is reserved for future implementation
GVAR_TOOL_BACKANGLE	5412	A register is reserved for future implementation
GVAR_TOOL_ORIENTATION	5413	A register is reserved for future implementation
GVAR_TOOL_HOLDER_ORIENTATION	5415	A register is reserved for future implementation
GVAR_SOFT_LIMITS_MIN	5421	(+8) Soft Limits Minimum Position 5421 - Soft Limit Minimum X Position 5422 - Soft Limit Minimum Y Position 5423 - Soft Limit Minimum Z Position 5424 - Soft Limit Minimum A Position 5425 - Soft Limit Minimum B Position 5426 - Soft Limit Minimum C Position 5427 - Soft Limit Minimum U Position 5428 - Soft Limit Minimum V Position 5429 - Soft Limit Minimum W Position
GVAR_SOFT_LIMITS_MAX	5431	(+8) Soft Limits Maximum Position 5431 - Soft Limit Maximum X Position 5432 - Soft Limit Maximum Y Position 5433 - Soft Limit Maximum Z Position 5434 - Soft Limit Maximum A Position 5435 - Soft Limit Maximum B Position 5436 - Soft Limit Maximum C Position 5437 - Soft Limit Maximum U Position 5438 - Soft Limit Maximum V Position 5439 - Soft Limit Maximum W Position
GVAR_OFFSET_G282	5441
GVAR_HOME_AFTER_POSITION	5451	(+8) Registers contain values that used by Homing macros to initialize Machine Position after Homing done 5451 - Machine Position X after Homing 5452 - Machine Position Y after Homing 5453 - Machine Position Z after Homing 5454 - Machine Position A after Homing 5455 - Machine Position B after Homing 5456 - Machine Position C after Homing 5457 - Machine Position U after Homing 5458 - Machine Position V after Homing 5459 - Machine Position W after Homing
GVAR_CURRENT_NUM_LINE	5480	Stop NC line
GVAR_CURRENT_NUM_NC	5460	Stop NC line
GVAR_CURRENT_NC_POSITION	5461	(+8) Registers keeps Toolpath Work coordinates when Job running was stopped (Paused). This registers are used by “Back to Path” procedure to return the tool on the toolpath position 5461 - Current NC Position X 5462 - Current NC Position Y 5463 - Current NC Position Z 5464 - Current NC Position A 5465 - Current NC Position B 5466 - Current NC Position C 5467 - Current NC Position U 5468 - Current NC Position V 5469 - Current NC Position W
GVAR_TOOL_SENSOR_POSITION	5471	(+8)
GVAR_SURFACE_SENSOR_WIDTH	5490	Specifies the sensor width in mm
GVAR_PIERCE_HEIGHT	5491
GVAR_OFFSETZ_MANUAL	5492
GVAR_OFFSETZ_THC	5493	Z-axis offset for THC
GVAR_SURFACE_SENSOR_NUMBER	5494
GVAR_SURFACE_SENSOR_TYPE	5495
GVAR_SHEET_THICKNESS	5496
GVAR_OFFSET_G283	5501
GVAR_OFFSET_G284	5511	+9
GVAR_END_SENSORS_IGNORE	5521	Writing “1” to this register will turn off Hardware Limit Sensors control temporarily.
GVAR_JOG_STEP_SIZE	5522
GVAR_JOG_STEP_FLOAT	5523
GVAR_SPINDLE_SPEED	5524	Register represents given Spindle Speed. It's equal to “Default Spindle Speed” by default. If G-code program “S”-code with new spidnle speed settings executed, the value will be changed accordingly.
GVAR_SOFT_LIMITS_IGNORE	5525	Writing “1” to this register will turn off Software Limits control temporarily.
GVAR_M30_SCHEDULED_REWIND	5526
GVAR_SHOW_NCMESSAGE	5527
GVAR_DRAWING_MODE	5528
GVAR_SHOCK_SENSOR_IGNORE	5529
GVAR_STEP_PER_UNIT	5530	+6
~~GVAR_PARKING1~~	5541	(+8) Registers are obsolete since another address space is reserved to ge up to 20 parking coordinates
~~GVAR_PARKING2~~	5551	(+8) Registers are obsolete since another address space is reserved to ge up to 20 parking coordinates
~~GVAR_PARKING3~~	5561	(+8) Registers are obsolete since another address space is reserved to ge up to 20 parking coordinates
~~GVAR_PARKING4~~	5571	(+8) Registers are obsolete since another address space is reserved to ge up to 20 parking coordinates
~~GVAR_PARKING5~~	5581	(+8) Registers are obsolete since another address space is reserved to ge up to 20 parking coordinates
~~GVAR_PARKING6~~	5591	(+8) Registers are obsolete since another address space is reserved to ge up to 20 parking coordinates
GVAR_CURRENT_TOOLCHANGER_TYPE	5600
GVAR_TOOLCHANGER_UNLOAD_OFFSET	5601	+8
GVAR_TOOLCHANGER_BLOW_OFF_OFFSET	5610	+8
GVAR_MYDEV_MSG_COUNTER	5630	+64 till 5694
GVAR_TECHNOLOGY_CFG	5701	0- flexible; 1- plasma; 2- gas; 3- mill; 4- lathe; 5- laser engraving enum{ TECH5701_FLEX=0, TECH5701_PLASMA, //1 TECH5701_GAS, //2 TECH5701_MILL, //3 TECH5701_LATHE, //4 TECH5701_LASER_ENG //5 };
GVAR_THC_ENABLE	5702	THC toggle, 0- disable; 1- enable
GVAR_IHC_ENABLE	5703	IHC toggle, 0- disable; 1- enable
~~GVAR_ET5_SLOW_PID_ENABLE~~	5705	ET5 SLOW PID: 0- disable; 1- enable
GVAR_CV_MODE	5710	Enables or disables the Constant Velocity mode (0 - disable, 1 - enable)
GVAR_CV_TOLERANCE	5711	This stores the constant velocity tolerance, as described in MyCNC Constant Velocity Mode (CV) manual
GVAR_SOFT_LIMITS_CHECKER	5714
GVAR_LATHE_GEARS	5715
GVAR_MODE_SINGLE_BLOCK	5720
GVAR_POSITION_STORED	5900	Stores a position
GVAR_CURRENT_MOTION_CODE	6060
GVAR_CURRENT_MOTION_WORK_PTR	6061	Motion controller work command pointer
GVAR_CURRENT_MOTION_LAST_PTR	6062	Motion controller work command pointer
GVAR_CURRENT_NC_LINE	6063	Current NC line number
GVAR_TOTAL_NC_LINES	6064	Stores the total number of lines of the control program
GVAR_SYSTEM_JOB_RUN	6065
GVAR_JOB_PROGRESS	6067	Denotes the current job progress in percentage of total lines done from the control program
GVAR_OIL_LENGTH_COUNTER	6080
GVAR_OIL_REVERSE_COUNTER	6081
GVAR_SOFT_LIMITS_CONTROL	6083
GVAR_OIL_SERVICE_COUNTER_X	6090	Mileage/oil change X-direction trips counter
GVAR_OIL_SERVICE_COUNTER_Y	6091	Mileage/oil change Y-direction trips counter
GVAR_OIL_SERVICE_COUNTER_Z	6092	Mileage/oil change Z-direction trips counter
GVAR_TOOLCHANGER_POSITION	6101	+8
GVAR_TOOLCHANGER_NEXT_POSITION	6111	+6
GVAR_TOOLPOT_1_POSITION	6121	+6
GVAR_TOOLPOT_2_POSITION	6131	+6
GVAR_TOOLPOT_3_POSITION	6141	+6
GVAR_TOOLPOT_4_POSITION	6151	+6
GVAR_TOOLPOT_5_POSITION	6161	+6
GVAR_TOOLPOT_6_POSITION	6171	+6
GVAR_TOOLPOT_7_POSITION	6181	+6
GVAR_TOOLPOT_8_POSITION	6191	+6
GVAR_TOOLPOT_9_POSITION	6201	+6
GVAR_TOOLPOT_10_POSITION	6211	+6
GVAR_TOOLPOT_11_POSITION	6221	+6
GVAR_TOOLPOT_12_POSITION	6231	+6
GVAR_TOOLPOT_13_POSITION	6241	+6
GVAR_TOOLPOT_14_POSITION	6251	+6
GVAR_TOOLPOT_15_POSITION	6261	+6
GVAR_TOOLPOT_16_POSITION	6271	+6
GVAR_OIL_SERVICE_LIMIT_X	6890	Mileage/oil change X-direction limit
GVAR_OIL_SERVICE_LIMIT_Y	6891	Mileage/oil change Y-direction limit
GVAR_OIL_SERVICE_LIMIT_Z	6892	Mileage/oil change Z-direction limit
GVAR_TOOL_CHANGE_SPEED	6970
GVAR_TAGENTKNIFE_ANGLE	7001	Current angle of the tangential knife
GVAR_TAGENTKNIFE_POSITION	7002	Current position of the tangential knife
GVAR_FEEDRATE_UNIT	7003
GVAR_ROTATERATE_UNIT	7004
GVAR_TANGENTKNIFE_ENABLE	7005	Register represents Automatic Tangential Knife control. If the register value is “0”, tangential control is disabled. If the register value is “1”, tangential knife control is enabled
GVAR_PLC_MOVE_PROCESS	7006
GVAR_THC_PWMSPEED	7009
GVAR_THC_ARC_VOLTAGE	7010
GVAR_THC_ARC_VOLTAGE_REF	7011	Reference arc voltage
GVAR_THC_ARC_VOLTAGE_ADJ	7012
GVAR_SAFE_HEIGHT (GVAR_TOOL_LIFT)	7020	Spindle lift height, in mm. Height value for safe XY motion.
GVAR_CREEP_SPEED	7021	Safe speed while motion down to path position.
GVAR_FEED_SPEED	7030	Feed Speed +9
GVAR_FEED_SPEED_X	7030	Feed Speed_X
GVAR_RAPID_SPEED	7040	+9
GVAR_RAPID_SPEED_X	7041	Rapid Speed_X
GVAR_JOG_SPEED	7050	+9
GVAR_JOG_SPEED_X	7050	Jog Speed_X
GVAR_MARKING_SPEED	7060	+9
GVAR_JOG_STEP_UNLIMITED	7070	the value is “1” if Current Jog Mode is “Unlimited”, otherwize is “0” (integer)
GVAR_JOG_LOCKED	7071	the value is “1” if Jogging is Locked, otherwize is “0” (integer)
GVAR_MOTION_OVERSPEED	7072
GVAR_SPINDLE_OVERSPEED	7073	Register represents Spindle Overrate percentage. Actual Spindle speed will be Actual_Speed=Default_Speed * Spindle_Overspeed/100 Default Spindle Speed defined by “Default Spindle Speed” variable and can be chaned in G-code program with S-code.
GVAR_JOG_OVERSPEED	7074
GVAR_PROBE_SENSOR_DIAMETER	7075	Specifies the probe sensor diameter in mm
GVAR_PROBE_SENSOR_XOFFSET	7076
GVAR_PROBE_SENSOR_YOFFSET	7077
GVAR_MOTION_OVERSPEED_G0	7079
GVAR_PLC_MOVE_SPEED	7080
GVAR_PLC_MOVE_ACCELERATION	7081
GVAR_PLC_RESET_COORDINATES	7082
GVAR_CAMERA_READY	7090	Variable denotes the camera state
GVAR_MULTIDEV_MASK	7100
GVAR_MULTIDEV_ENABLE1	7101
GVAR_MULTIDEV_ENABLE2	7102
GVAR_MULTIDEV_ENABLE3	7103
GVAR_MULTIDEV_ENABLE4	7104
GVAR_MULTIDEV_ENABLE5	7105
GVAR_MULTIDEV_ENABLE6	7106
GVAR_MULTIDEV_ENABLE7	7107
GVAR_MULTIDEV_ENABLE8	7108
GVAR_MULTIDEV_ENABLE9	7109
GVAR_MULTIDEV_ENABLE10	7110
GVAR_MULTIDEV_ENABLE11	7111
GVAR_MULTIDEV_ENABLE12	7112
GVAR_MULTIDEV_ENABLE13	7113
GVAR_MULTIDEV_ENABLE14	7114
GVAR_MULTIDEV_ENABLE15	7115
GVAR_MULTIDEV_ENABLE16	7116
GVAR_MULTIDEV_ENABLE32	7132	reserved up to 32 devices
GVAR_MD_MASTER_MOTION_CODE	7140	master
GVAR_M1_CONDITIONAL_STOP	7150
GVAR_LATHE_THREAD_PULLOUT	7154
GVAR_SPINDLE_ORIENTATION	7155
GVAR_PLASMA_PROCESS_CURRENT	7156
GVAR_ALIGN_CHECK	7170
GVAR_HW_INPUTS0	7180	Stores the input value in 32 bit increments. In this way, Input0 is 0-31, Input1 is 32-63, etc
GVAR_HW_INPUTS1	7181
GVAR_HW_INPUTS2	7182
GVAR_HW_INPUTS3	7183
GVAR_HW_OUTPUTS0	7184	Stores the output value (can be both read and written to)
GVAR_HW_OUTPUTS1	7185
GVAR_HW_OUTPUTS2	7186
GVAR_HW_OUTPUTS3	7187
GVAR_HW_INPUTS4	7188
GVAR_HW_INPUTS5	7189
GVAR_HW_INPUTS6	7190
GVAR_HW_INPUTS7	7191
GVAR_HW_OUTPUTS4	7192	Stores the output value (can be written/read
GVAR_HW_OUTPUTS5	7193
GVAR_HW_OUTPUTS6	7194
GVAR_HW_OUTPUTS7	7195
GVAR_HW_ADC0	7196	Stores the ADC value to be read
GVAR_HW_ADC1	7197
GVAR_HW_ADC2	7198
GVAR_HW_ADC3	7199
GVAR_HW_ADC4	7200
GVAR_HW_ADC5	7201
GVAR_HW_ADC6	7202
GVAR_HW_ADC7	7203
GVAR_HW_INP_TCOUNT0	7206
GVAR_HW_INP_TCOUNT1	7207
GVAR_HW_INP_TCOUNT2	7208
GVAR_HW_INP_TCOUNT3	7209
GVAR_PARKING_LAST	7210	Data for the last parking location is stored in this register
GVAR_RTCP_DEBUG_X	7211	RTCP correction data for X axis is stored in this register for debug purpose. This register is read-only
GVAR_RTCP_DEBUG_Y	7212	RTCP correction data for Y axis is stored in this register for debug purpose. This register is read-only
GVAR_RTCP_DEBUG_Z	7213	RTCP correction data for Z axis is stored in this register for debug purpose. This register is read-only
GVAR_RTCP_SHOULDER	7215	Shoulder Length (in units) for RTCP correction calculation.
GVAR_HEAD1_ENABLE	7221
GVAR_HEAD2_ENABLE	7222
GVAR_HEAD3_ENABLE	7223
GVAR_HEAD4_ENABLE	7224
GVAR_HCONTROL_VREF	7229
GVAR_PLC_USER_DATA	7230	(+32)
GVAR_PLC_USER_DATA_LAST	7261
GVAR_HW_DAC0	7270	Stores the DAC 0 value to be read
GVAR_HW_DAC1	7271	Stores the DAC 1 value to be read
GVAR_HW_DAC2	7272	Stores the DAC 2 value to be read
GVAR_HW_DAC3	7273	Stores the DAC 3 value to be read
GVAR_HW_DAC4	7274	Stores the DAC 4 value to be read
GVAR_HW_DAC5	7275	Stores the DAC 5 value to be read
GVAR_HW_DAC6	7276	Stores the DAC 6 value to be read
GVAR_HW_DAC7	7277	Stores the DAC 7 value to be read
GVAR_HW_PWM0	7278	Stores the PWM 0 value to be read
GVAR_HW_PWM1	7279	Stores the PWM 1 value to be read
GVAR_HW_PWM2	7280	Stores the PWM 2 value to be read
GVAR_HW_PWM3	7281	Stores the PWM 3 value to be read
GVAR_HW_PWM4	7282	Stores the PWM 4 value to be read
GVAR_HW_PWM5	7283	Stores the PWM 5 value to be read
GVAR_HW_PWM6	7284	Stores the PWM 6 value to be read
GVAR_HW_PWM7	7285	Stores the PWM 7 value to be read
GVAR_GOTO_PROGRAMMING	7290
GVAR_GOTO_POSITION	7291	+16
GVAR_REFERENCE_POSITION	7311	+16
GVAR_PRG_RECT_P	7330	+16
GVAR_PRG_RECT_M	7350	+16
GVAR_PLC_SPINDLE_STATE	7370
GVAR_PLC_SPINDLE_SPEED	7371	Variable stores the spindle speed
GVAR_PLC_COOLANT_STATE	7372
GVAR_PLC_MIST_STATE	7373	Mist state is stored
GVAR_JOG_STEP_SIZE	5522	prepresents current jog step size (double)
GVAR_JOG_STEP_0_0001	7381	the value is “1” if Current Jog Step Size is “0.0001”, otherwize is “0” (integer)
GVAR_JOG_STEP_0_001	7382	the value is “1” if Current Jog Step Size is “0.001”, otherwize is “0” (integer)
GVAR_JOG_STEP_0_01	7383	the value is “1” if Current Jog Step Size is “0.01”, otherwize is “0” (integer)
GVAR_JOG_STEP_0_1	7384	the value is “1” if Current Jog Step Size is “0.1”, otherwize is “0” (integer)
GVAR_JOG_STEP_1_0	7385	the value is “1” if Current Jog Step Size is “1.0”, otherwize is “0” (integer)
GVAR_JOG_STEP_10	7386	the value is “1” if Current Jog Step Size is “10”, otherwize is “0” (integer)
GVAR_SYSTEM_CONFIGURED	7390
GVAR_HOMING_X_RESET	7391	The register value is used as a flag that Homing X needed. The value is automatically set to “1” is - CNC control software just loaded - Emergency button pressed - X Servo Driver not ready event received The register can be used for either Mandatory Homing Handler procedure or just to display information about possible X position lost
GVAR_HOMING_Y_RESET	7392	The register value is used as a flag that Homing Y needed. The value is automatically set to “1” is - CNC control software just loaded - Emergency button pressed - Y Servo Driver not ready event received The register can be used either for Mandatory Homing Handler procedure or just to display information about possible Y position lost
GVAR_HOMING_Z_RESET	7393	The register value is used as a flag that Homing Z needed. The value is automatically set to “1” is - CNC control software just loaded - Emergency button pressed - Z Servo Driver not ready event received The register can be used for either Mandatory Homing Handler procedure or just to display information about possible Z position lost
GVAR_HOMING_A_RESET	7394	The register value is used as a flag that Homing A needed. The value is automatically set to “1” is - CNC control software just loaded - Emergency button pressed - A Servo Driver not ready event received The register can be used for either Mandatory Homing Handler procedure or just to display information about possible A position lost
GVAR_HOMING_B_RESET	7395	The register value is used as a flag that Homing B needed. The value is automatically set to “1” is - CNC control software just loaded - Emergency button pressed - B Servo Driver not ready event received The register can be used for either Mandatory Homing Handler procedure or just to display information about possible B position lost
GVAR_HOMING_C_RESET	7396	The register value is used as a flag that Homing C needed. The value is automatically set to “1” is - CNC control software just loaded - Emergency button pressed - C Servo Driver not ready event received The register can be used for either Mandatory Homing Handler procedure or just to display information about possible C position lost
GVAR_PRG_EXTREMA_P	7400	+16
GVAR_PRG_EXTREMA_M	7420	+16
GVAR_CURRENT_FEEDRATE	7440
GVAR_TUBE_DIAMETER	7450	Stores tube diameter (in mm)
GVAR_HT_CURRENT_SETPOINT GVAR_PLASMA_PROCESS_CURRENT
GVAR_HT_PLASMA_PREFLOW	7461
GVAR_HT_PLASMA_CUTFLOW	7462
GVAR_HT_SHIELD_PREFLOW	7463
GVAR_HT_SHIELD_CUTFLOW	7464
GVAR_HT_PLASMA_GAS_TYPE	7465
GVAR_HT_SHIELD_GAS_TYPE	7466
GVAR_HT_GAS_MIXING_SETPOINT	7467
GVAR_HT_SYSTEM_ERROR	7468
GVAR_HT_SYSTEM_STATUS	7469
GVAR_HT_PUMP_CONTROL	7470
GVAR_HT_FIRMWARE_VERSION	7471
GVAR_HT_TEST_CUTFLOW_GASES	7472
GVAR_HT_TEST_PREFLOW_GASES	7473
GVAR_HT_LINE_VOLTAGE	7474
GVAR_HT_CHOPPER_CURRENT	7475
GVAR_HT_WORK_LEAD_CURRENT	7476
GVAR_HT_CHOPPER_TEMPERATURE	7477
GVAR_HT_TRANS_TEMPERATURE	7478
GVAR_HT_GAS_PRESSURE	7479
GVAR_HT_COOLANT_FLOW_RATE	7480
GVAR_HT_CURRENT_ACTUAL	7481
GVAR_OXYFUEL_PREHEAT_COUNTDOUN	7490
GVAR_OXYFUEL_PREHEAT_COUNTDOUN_V2	7491
GVAR_PROBE_SENSOR_CORRECTION_XMINUS	7501
GVAR_PROBE_SENSOR_CORRECTION_XPLUS	7502
GVAR_PROBE_SENSOR_CORRECTION_YMINUS	7503
GVAR_PROBE_SENSOR_CORRECTION_YPLUS	7504
GVAR_PROBE_SENSOR_CORRECTION_CENTERX	7505
GVAR_PROBE_SENSOR_CORRECTION_CENTERY	7506
GVAR_CUTTING_FROM_EDGE	7520
GVAR_MIST_PULSE_WIDTH	7521	NS-CNC Pulse Mist Mode
GVAR_MIST_PULSE_PAUSE	7522	Specifies the pause for the pulse mist mode
GVAR_GANTRY_CORRECTION	7525	Gantry Alignment correction
GVAR_DRAWING_FAST	7530
GVAR_SHOW2D_AXISA_RADIUS	7540
GVAR_ASSIGN_TOOL_OFFSET_X	7515
GVAR_ASSIGN_TOOL_OFFSET_Z	7517
GVAR_LATHE_TOOL_LENGTH_CORRECTION_X	7511	Specifies the x-axis tool length correction for lathes
GVAR_LATHE_TOOL_LENGTH_CORRECTION_Z	7513	Specifies the y-axis tool length correction for lathes
GVAR_LATHE_TOOL_OFFSET_CORRECTION_X	7514	Specifies the z-axis tool length correction for lathes
GVAR_SAW_WIDTH	7550	Specifies the saw width (similar to tool diameter)
GVAR_SAW_POSTION_START	7551
GVAR_SAW_POSTION_END	7552
GVAR_SAW_SLOT_L	7553
GVAR_SAW_SLOT_L1	7554
GVAR_SAW_GROOVE_L	7555
GVAR_SAW_GROOVE_T	7556
GVAR_SAW_Z_SAFE	7557
GVAR_SAW_Z_WORK	7558
GVAR_SAW_CUT_WIDTH	7559
GVAR_SAW_DIAMETER	7560
THC Control variables
THC #0
GVAR_THC0_CONTROL	7570	THC API
GVAR_THC0_INPUT	7571	THC API
GVAR_THC0_VREF	7572	THC API
GVAR_THC0_OFFSETZ	7573	THC API
GVAR_THC0_ENABLED	7574	THC API
THC #1
GVAR_THC1_CONTROL	7575	THC API
GVAR_THC1_INPUT	7576	THC API
GVAR_THC1_VREF	7577	THC API
GVAR_THC1_OFFSETZ	7578	THC API
GVAR_THC1_ENABLED	7579	THC API
THC #
GVAR_THC2_CONTROL	7580	THC API
GVAR_THC2_INPUT	7581	THC API
GVAR_THC2_VREF	7582	THC API
GVAR_THC2_OFFSETZ	7583	THC API
GVAR_THC2_ENABLED	7584	THC API
THC #3
GVAR_THC3_CONTROL	7585	THC API
GVAR_THC3_INPUT	7586	THC API
GVAR_THC3_VREF	7587	THC API
GVAR_THC3_OFFSETZ	7588	THC API
GVAR_THC3_ENABLED	7589	THC API

GVAR_KNIFE_FLAG	7587	PLC/Software controlled variable. Tool change PLC procedure writes “1” to the register when Tool number changed to Tangential Knife Tool, otherwise writes “0”.
Cutchart variables
GVAR_CUTPROCESS_ID	7600
GVAR_CUTPROCESS_KERF	7601	Specifies the kerf value for the cutchart
GVAR_CUTPROCESS_MATERIAL_THICKNESS	7602
GVAR_CUTPROCESS_TIME_PREHEAT	7603	Preheat time
GVAR_CUTPROCESS_TIME_SOFT_OXY_START	7604
GVAR_CUTPROCESS_CUTSPEED	7605
Oxy Fuel cutting, Automatic Gas Console
GVAR_CUTPROCESS_AGC_IGNITION_FUEL	7610	Automatic gas console ignition fuel variable
GVAR_CUTPROCESS_AGC_IGNITION_OXY_HEAT	7611
GVAR_CUTPROCESS_AGC_PREHEAT_FUEL	7612
GVAR_CUTPROCESS_AGC_PIERCE_FUEL	7613
GVAR_CUTPROCESS_AGC_PIERCE_OXY_CUT	7614
GVAR_CUTPROCESS_AGC_PIERCE_OXY_HEAT	7615
GVAR_CUTPROCESS_AGC_CUTTING_FUEL	7616
GVAR_CUTPROCESS_AGC_CUTTING_OXY_HEAT	7617
GVAR_CUTPROCESS_AGC_CUTTING_OXY_CUT	7618
GVAR_CUTPROCESS_AGC_PILOT_FUEL	7619
GVAR_CUTPROCESS_AGC_PILOT_OXY_HEAT	7620

GVAR_CUTPROCESS_GAS_SELECT1	7621
GVAR_CUTPROCESS_GAS_SELECT2	7622
Plasma Cutting, Torch consumables
GVAR_CUTPROCESS_SHIELD_RETAINING_CAP	7630
GVAR_CUTPROCESS_SHIELD	7631
GVAR_CUTPROCESS_NOZZLE_RETAINING_CAP	7632
GVAR_CUTPROCESS_NOZZLE	7633
GVAR_CUTPROCESS_SWIRL_RING	7634
GVAR_CUTPROCESS_ELECTRODE	7635
GVAR_CUTPROCESS_WATER_TUBE	7636
Plasma Cutting, Height control settings
GVAR_CUTPROCESS_HC_PIERCE_DELAY	7640	Pierce delay in seconds for the THC process -loaded from the cutcharts and is a separate value from the Items that set the working THC values
GVAR_CUTPROCESS_HC_IGNITION_HEIGHT	7641	Ignition height in mm for the THC process
GVAR_CUTPROCESS_HC_PIERCE_HEIGHT	7642	Pierce height in mm
GVAR_CUTPROCESS_HC_CUT_HEIGHT	7643	Cutting height in mm
GVAR_CUTPROCESS_HC_CONTROL_DELAY	7644	THC delay, in seconds
GVAR_CUTPROCESS_HC_ARC_VOLTAGE	7645	Reference arc voltage
GVAR_CUTPROCESS_HC_PIERCE_HEIGHT_FACTOR	7646	Reserved for Hypertherm consoles, denotes the factor between the pierce height and the cutting height
GVAR_CUTPROCESS_CREEP_TIME	7650	Creep time, in seconds
GVAR_CUTPROCESS_CREEP_SPEED	7651	Creep speed

GVAR_CUTPROCESS_MIX_GAS1	7652
GVAR_CUTPROCESS_MIX_GAS2	7653
Plasma Cutting, Automatic Gas Console
GVAR_CUTPROCESS_AGC_PLASMA_PREFLOW	7660	Automatic gas console preflow value
GVAR_CUTPROCESS_AGC_SHIELD_PREFLOW	7661	Shield preflow value
GVAR_CUTPROCESS_AGC_PLASMA_CUTEFLOW	7662	Plasma cutflow value
GVAR_CUTPROCESS_AGC_SHIELD_CUTEFLOW	7663	Shield cutflow value
Plasma Cutting, Manual Gas Console
GVAR_CUTPROCESS_MGC_PLASMA_PREFLOW	7670	Manual plasma preflow value taken from the operator panel in order to display on the screen
GVAR_CUTPROCESS_MGC_SHIELD_PREFLOW	7671	Manual shield preflow value
GVAR_CUTPROCESS_MGC_PLASMA_CUTEFLOW	7672	Manual plasma cutflow value
GVAR_CUTPROCESS_MGC_SHIELD_CUTEFLOW	7673	Manual shield cutflow value
Plasma Cutting
GVAR_CUTPROCESS_SET_PROCESS_CURRENT	7675
GVAR_CUTPROCESS_SET_ARC_CURRENT	7676	Set the arc current
GVAR_CUTPROCESS_CORNER_REDUCTION	7677	Sets the corner reduction value in order to reduce process current and prevent overheating at the corners during the cut
GVAR_CUTPROCESS_TORCH_TYPE	7680	Sets the cutchart torch type
GVAR_CUTPROCESS_MATERIAL_TYPE	7681	Sets the material type
GVAR_CUTPROCESS_SPECIFIC_MATERIAL	7682	Sets the specific material used in the cut
GVAR_CUTPROCESS_PLASMA_SHIELD_GASES	7683	Denotes the shield gases used
GVAR_CUTPROCESS_PROCESS	7684	Denotes the particular process employed (bevel cutting, fine cutting, etc) - can be found in the Cutchart menu.
GVAR_CUTPROCESS_VENDOR	7685	Denotes the machine vendor
GVAR_CUTPROCESS_TECHNOLOGY	7686	Denotes whether plasma or oxy-fuel (gas) cutting is used.
GVAR_CUTPROCESS_REVISION	7687	The cutchart version used (reserved for Hypertherm machines)
Timers
GVAR_TIMER0_ENABLED	8100	Writing “0” to this register will disable Timer0, writing “1” will enable Timer0
GVAR_TIMER0_PORT	8101	Writing to this register will change Output pin connected to Timer0. Writing value is the Output Pin#
GVAR_TIMER0_PULSE	8102	A value written to this register specifies the Timer 0 Pulse width in milliseconds
GVAR_TIMER0_PAUSE	8103	A value written to this register specifies the Timer 0 Pause in milliseconds
GVAR_TIMER1_ENABLED	8104	Writing “0” to this register will disable Timer1, writing “1” will enable Timer1
GVAR_TIMER1_PORT	8105	Writing to this register will change Output pin connected to Timer1. Writing value is the Output Pin#
GVAR_TIMER1_PULSE	8106	A value written to this register specifies the Timer 1 Pulse width in milliseconds
GVAR_TIMER1_PAUSE	8107	A value written to this register specifies the Timer 1 Pause in milliseconds
GVAR_TIMER2_ENABLED	8108	Writing “0” to this register will disable Timer2, writing “1” will enable Timer2
GVAR_TIMER2_PORT	8109	Writing to this register will change Output pin connected to Timer2. Writing value is the Output Pin#
GVAR_TIMER2_PULSE	8110	A value written to this register specifies the Timer 2 Pulse width in milliseconds
GVAR_TIMER2_PAUSE	8111	A value written to this register specifies the Timer 2 Pause in milliseconds
GVAR_TIMER3_ENABLED	8112	Writing “0” to this register will disable Timer3, writing “1” will enable Timer3
GVAR_TIMER3_PORT	8113	Writing to this register will change the Output pin connected to Timer3. Written values specifies the Output Pin#
GVAR_TIMER3_PULSE	8114	A value written to this register specifies the Timer 3 Pulse width in milliseconds
GVAR_TIMER3_PAUSE	8115	A value written to this register specifies the Timer 3 Pause in milliseconds
GVAR_GENERATOR_FRQ_RATIO	8132	Ratio for the step-dir coolant control to convert the step motor values into the software units. Set experimentally.
GVAR_GENERATOR_FRQ	8133	Rate, in ml/hour, for the step-dir coolant control
GVAR_FLY0_ZOFFSET	8140	Z correction (mm)
Encoders
GVAR_ET5_ENCODER	9000	(+16) Registers represent Encoder values. Writing to this registers does not affect anything. Selected channel Current Encoder value will be returned when reading these registers. Reading these registers from the controller Hardware PLC will return actual Encoder value. Encoder values in the software are updated about every 128ms. This delay should be counted when using Encoder values from the Software PLC. 9000 - Encoder #0 value 9001 - Encoder #1 value 9002 - Encoder #2 value 9003 - Encoder #3 value 9004 - Encoder #4 value 9005 - Encoder #5 value 9006 - Encoder #6 value 9007 - Encoder #7 value
GVAR_ET5_EXPOSITION	9016	(+16) Registers represent Motor PID Following Error (a difference between commanded and sensed position). Writing to this registers does not affect anything. A Following Error of Selected PID will be returned when reading these registers. Reading these registers from the controller Hardware PLC will return actual value of the Following Error. Following Error values in the software are updated about every 128ms. This delay should be counted when using the registers in the Software PLC. 9016 - Motor channel #0 PID Following Error 9017 - Motor channel #1 PID Following Error 9018 - Motor channel #2 PID Following Error 9019 - Motor channel #3 PID Following Error 9020 - Motor channel #4 PID Following Error 9021 - Motor channel #5 PID Following Error 9022 - Motor channel #6 PID Following Error 9023 - Motor channel #7 PID Following Error Examples FERROR implementation
GVAR_ET5_ENCODER_Z	9032	+16
GVAR_ET5_ENCODER_WZ	9048	+16
GVAR_ENCODER_Z_EVENT	9070
GVAR_POPUP_MESSAGE	9100	+16
GVAR_SERVO_PID_ON	60000	Denotes that the servo PID is ON
GVAR_SERVO_PID_OFF	60001	Denotes that the servo PID is OFF
Modbus devices API
GVAR_MODBUS_SET_ID	60010	Value written to this registed is used as Modbus ID of device to communicate with
GVAR_MODBUS_SET_PROTOCOL	60011	Writing to this register change Modbus protocol. "0" - Modbus/RTU, "1" - Modbus/ASCII
GVAR_MODBUS_SET_SPEED	60012	Writing to this register will change RS485/Modbus speed. Available speeds are 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
GVAR_MODBUS_SET_CONNECTION	60013	Change UART connection parameters: number of bits (8 or 7), parity (none, odd, even), number of stop bits (1, 2). Data comes in 3 low nibbles. The lowest is stop bits, then parity, then number of bits. Example: 0x801=8,N,1 0x712=7,O,2 0x822=8,E,2
GVAR_MODBUS_SET_VALUE	60019	Writing to register will latch the value in shadow register
GVAR_MODBUS_SET_ADDRESS	60020	Writing to register will latch Address to read in shadow register
GVAR_MODBUS_WRITE	60030	Writing to register will send value from shadow register to Modbus devive to address given in written value
GVAR_MODBUS_READ	60031	Read from this register will send read inquiry to Modbus device (PLC controller will be in till Regiter value received from Modbus device). Writing to this register will send ready inquiry to Modbus device. The value written is used as Register address to read
GVAR_MODBUS_WRITE_BITS	60035	Write multiple coils. Write multiple coils command indicates the 16-bit address of first coil to write, the number of coils to write, number of bytes of coil values to follow, and the coil values. The response will be the address of the first coil and the number of coils.
GVAR_MODBUS_READ_COILS	60036	60039 is to be used instead.
GVAR_MODBUS_RAW_WRITE	60037	Write single register. Write single register indicates address of the holding register and the new value of the register. The response, similarly, is the address of the register and the new value.
GVAR_MODBUS_WRITE_BIT	60038	Write single coil. Requests the 16-bit address of the coil, and the value to write (0 for OFF, FF00 for ON)
GVAR_MODBUS_READ_INPUTS	60039	Read multiple coils. This will request the address of the first coil to read and the number of coils to read. The Modbus device will respond with the number of bytes to follow and the coil input values
GVAR_MODBUS_INPUT_REGS0	60060	Input register 0 (+31)

Global Variables Description