Differences

This shows you the differences between two versions of the page.

--- spindle_speed_control_through_-10v_dac_channel_et10 [2017/05/22 22:25] – skirillov
+++ spindle_speed_control_through_-10v_dac_channel_et10 [2017/12/01 00:42] – es
@@ Line 1: / Line 1: @@
-==== Spindle Speed control through +\-10V DAC channel (ET10) ====
+===== Spindle Speed control through +\-10V DAC channel (ET10) =====
@@ Line 11: / Line 11: @@
 There are number of ways to access to DAC Offset register.
-== PLC controller (Hardware) ==
+=== PLC controller (Hardware) ===
-DAC offset register is mapped to address 0x32 of [[External CNC Variables]] Area.
+DAC offset register is mapped to address 0x32 of [[mycnc:extern_variables|Extern CNC Variables]] Area.
 <code c>#define EXT_ET5_DAC_OFFSET 0x32</code>
@@ Line 35: / Line 35: @@
 </code>
-Another examples with +\-10V DAC programming can be found here - [[plc:plc_examples#Spindle_On_Relay_and_ET10_dac|M03.plc]], [[plc:plc_examples#Spindle_Speed_Control_for_ET10_DAC| SPN.plc]]
+Another examples with +\-10V DAC programming can be found here -
+[[plc:plc_examples#M03,_Spindle_On,_Relay_and_ET10_DAC|M03.plc]], [[plc:plc_examples#Spindle_Speed_Control_for_ET10_DAC| SPN.plc]]