Differences

This shows you the differences between two versions of the page.

--- mycnc:mycnc_rotate_widget [2019/10/31 11:17] – ivan
+++ mycnc:mycnc_rotate_widget [2019/10/31 11:44] – ivan
@@ Line 24: / Line 24: @@
 {{:mycnc:rotation-widget-012-enter-angle-popup.png}}
 //To be able to use the corrected nesting chart, it is necessary to press the Send button in order to display the rotated file in the main program window. //
-{{:mycnc:rotate_7.png?1000|}}
+{{:mycnc:rotation-widget-013-send.png}}
 **//Sheet position correction by using two points//**
 //Set the first point. Position the plasma torch at the lower left corner of the sheet. The point is recorded by pressing the "1" button. Movement is done with the arrows at the center of the screen.//
-{{:mycnc:rotate_2.png?1000|}}
+{{:mycnc:rotation-widget-014.png}}
 //Next, move the plasma torch along the sheet (the longer the distance of this movement, the more accurate the correction will be). We bring the plasma torch to the edge of the sheet after moving along it. We assign this second point by pressing the "2" button. Movement is done with the arrows at the center of the screen.//
-{{:mycnc:rotate_3.png?1000|}}
+{{:mycnc:rotation-widget-015.png}}
 //After clicking on the "Apply Correction" button, you must confirm the program conversion in the popup window (press the check mark icon).//
 {{:mycnc:rotate_4.png?1000|}}