Differences

This shows you the differences between two versions of the page.

--- mycnc:mql [2020/10/08 11:15] – ivan
+++ mycnc:mql [2020/10/08 11:15] – ivan
@@ Line 13: / Line 13: @@
 The fine-tuning is done through the built-in PLC procedures, with the setup described in detail in the [[mycnc:independent_pulse_generator|Independent Pulse Generator]] manual.
-In certain profiles (such as the X1366M4E), the MQL functionality is accessible via the main myCNC screen:
+In certain profiles (such as the X1366M4E), the MQL functionality is accessible via the main myCNC screen (in the Coordinates section):
 {{:mycnc:mql-002-main-screen-x1366m4e.png}}