Differences

This shows you the differences between two versions of the page.

--- mycnc:cutcharts [2019/07/08 15:16] – ivan
+++ mycnc:cutcharts [2020/08/24 13:55] – ivan
@@ Line 1: / Line 1: @@
 ===== Cutcharts =====
-myCNC software supports cutcharts. Cutting parameters such as **Cutting speed**, **Process current**, **Arc voltage reference**, **Ignition Height**, **Pierce height**, **Pierce time**, **Cutting height**, **Kerf compensation** and others can be loaded from the Cutcharts depending on the plasma power source, materiel type, material thickness and gases/nozzles used.
+myCNC software supports cutcharts. Cutting parameters such as **Cutting speed**, **Process current**, **Arc voltage reference**, **Ignition Height**, **Pierce height**, **Pierce time**, **Cutting height**, **Kerf compensation** and others can be loaded from the Cutcharts depending on the plasma power source, material type, material thickness and gases/nozzles used.
 Cutchart database is stored in the myCNC software as an SQLite database file. The database can be filled manually or imported automatically from an XML or CSV file format.
@@ Line 11: / Line 11: @@
      * Ubuntu Mate: /opt/myCNC
 {{:mycnc:cutcharts-003-folder.png}}
-      * * Tinkerboard computers: /home/USERNAME/myCNC/ (usually /home/operator/myCNC/)
+      * Tinkerboard computers: /home/USERNAME/myCNC/ (usually /home/operator/myCNC/)
 {{:mycnc:cutcharts-007-tinkerboard.png}}
   * Go to **Settings > Config > Technology > Cutcharts**