Differences

This shows you the differences between two versions of the page.

--- quickstart:mycnc-quick-start:start-stop-setup [2019/05/27 11:49] – ivan
+++ quickstart:mycnc-quick-start:start-stop-setup [2019/08/12 10:55] – ivan
@@ Line 10: / Line 10: @@
 A common scenario with mill and plasma machines is having to move the plasma torch or any other working tool away from the cutting point in the middle of running a program, for cleaning/inspection/etc. In order to continue the cutting process smoothly after having stopped the machine and moved the working tool, the **On Start** section of the Start/Stop menu can be used to properly describe the behaviour of the machine when it is started again from the middle of the program.
+The Check Soft Limits for the full toolpath toggle specifies whether the user wants to check the entire program for issues with soft limits (program work position going outside of soft limits) before starting the program. If the toggle is set to ON, and there are issues with the soft limits present, the program will not start. This setting is not recommended for extremely large programs, as it takes a lot of time to run the check. Programs under 10 000 lines of code are best suited for this process.
 {{:quickstart:mycnc-quick-start:start-stop-002-preferences-window-on-start.jpg}}