User Tools

Site Tools


quickstart:mycnc-quick-start:probe_setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
quickstart:mycnc-quick-start:probe_setup [2019/07/04 12:14] ivanquickstart:mycnc-quick-start:probe_setup [2019/09/16 11:53] ivan
Line 60: Line 60:
 2. In **CNC Settings > Probing Wizard > Probing Macro Wizard**, click **Generate All Probing Macros** and **Generate PLC Probing procedure M288**. Among other settings, this generates the necessary windows for the popup screens of the probe sensor (popups 20, 21 and 22). 2. In **CNC Settings > Probing Wizard > Probing Macro Wizard**, click **Generate All Probing Macros** and **Generate PLC Probing procedure M288**. Among other settings, this generates the necessary windows for the popup screens of the probe sensor (popups 20, 21 and 22).
 {{:mycnc:mill-probe-software-002.jpg}} {{:mycnc:mill-probe-software-002.jpg}}
 +
 +3. After generating the M288 probing procedure, head into **CNC Settings > Config > PLC > Hardware PLC** and click the **Save All**, **Build All** and **Send** buttons to trigger the PLC disk image reflashing process:
 +
 +{{:quickstart:mycnc-quick-start:mill-probe-software-004.png}}
    
-3If you want to set the particular port that you are using for your sensor, go to Go to **CNC Settings > Probing Wizard > Probing Config** and click the **Enable Probe sensor protection** button after setting the particular port desired (Port 9 for this example). This setting will be automatically mirrored in the **CNC Settings > Triggers/Timers** window. +4In order to specify the particular port that you are using for your sensor, go to Go to **CNC Settings > Probing Wizard > Probing Config** and click the **Enable Probe sensor protection** button after setting the particular port desired (Port 9 for this example). This setting will be automatically mirrored in the **CNC Settings > Triggers/Timers** window. 
 {{:mycnc:mill-probe-software-003.jpg}} {{:mycnc:mill-probe-software-003.jpg}}
  
-4. Double-check the TRIG04 procedure from Step 1, and edit it back to the code above if it had been changed (this can occur on older versions of the software).+5. Double-check the TRIG04 procedure from Step 1, and edit it back to the code above if it had been changed (this can occur on older versions of the software).
  
 The probe wizard setup should now be complete.  The probe wizard setup should now be complete. 
quickstart/mycnc-quick-start/probe_setup.txt · Last modified: 2021/08/04 14:18 by ivan

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki