Differences

This shows you the differences between two versions of the page.

--- quickstart:mycnc-quick-start:probe_setup [2019/07/04 10:13] – ivan
+++ quickstart:mycnc-quick-start:probe_setup [2019/07/04 10:51] – ivan
@@ Line 1: / Line 1: @@
 =====Setting up the probe tool=====
-This manual covers the basic setup of the probe tool that can be used in a number of myCNC profiles and applications in order to determine an exact position of the part on a milling machine. The probe can find edges, corners, hole centers, and more.
+The probe tool is currently being sold as part of some myCNC kits. The main sensor looks like the image below:
+{{:quickstart:mycnc-quick-start:vers-pr-render-s-001.jpg}}
+This manual covers the basic setup of the probe that can be used in a number of myCNC profiles and applications in order to determine an exact position of the part on a milling machine. The probe can find edges, corners, hole centers, and more.
 ====Calibration/Adjustment of the probe sensor====
@@ Line 21: / Line 25: @@
 ====Connection to the myCNC board====
-A Vers PR probe is currently being sold as part of some myCNC kits. The sensor looks like the image below:
-{{:quickstart:mycnc-quick-start:probe-sensor-physical-001.jpg}}
 In order to set up this probe sensor with a myCNC controller, please consult the diagrams below. Note that while the setup is shown in one particular configuration on the ET7 myCNC control board, it can be replicated on other boards and in other connection configurations as well:
@@ Line 78: / Line 78: @@
 =====Probe tools currently available=====
-The currently available CNC touch probe tools are the Wired Probe Sensor (SEN-PR-WR01), the Wireless Probe Sensor (SEN-PR-WL01), and the Wired Tool Setter (SEN-TS-WR01). The specifications for each of these tools can be found below.
+The currently available CNC touch probe tools are the Wired Probe Sensor (SEN-PR-WR01), the Wireless Probe Sensor (SEN-PR-WL01), and the Wired Tool Setter (SEN-TS-WR01). The specifications and technical characteristics for each of these tools can be found below.
+===Wired Probe Sensor (SEN-PR-WR01)===
+  * Unilateral repeatability: <0.003 mm
+  * Search directions: ±X, ±Y, -Z
+  * Deflection in XYZ directions: ±4mm
+  * Force to decouple in XY direction: from 0.5 to 0.8 H
+  * Force to decouple in Z direction: 2H
+  * Power supply: +5V
+  * Current consumption: <4mA
+{{:quickstart:mycnc-quick-start:probe-size-drawing-001.jpg}}
+===Wireless Probe Sensor (SEN-PR-WL01)===
-===Wired Probe Sensor===
+  * Unilateral repeatability: <0.003 mm
+  * Search directions: ±X, ±Y, -Z
+  * Deflection in XYZ directions: ±4mm
+  * Force to decouple in XY direction: from 0.5 to 0.8H
+  * Force to decouple in Z direction: 2H
+  * Latency delay: < 2 ms
+  * Error detection delay: < 0.33 ms
+  * Probe power supply: CR2032 3V
+  * Probe current consumption: <0.6mA
+  * Receiver power supply: 5-12V
+  * Receiver current consumption: 35 mA
+  * Radio channel radius: 6 meters
+  * Radio frequency: 2.4 GHz
+{{:quickstart:mycnc-quick-start:probe-size-drawing-002.jpg}}
-===Wireless Probe Sensor===
+===Wired Tool Setter (SEN-TS-WR01)===
-===Wired Tool Setter===
+The tool setter is designed to determine the exact coordinates of the tool mounted on a CNC milling machine using the contact method. The CNC system generates these coordinates as the tool comes into contact with the tool setter measurement platform, and uses them to calculate the height and diameter of the tool, to link the machining program to the work tool location.
+  * Unilateral repeatability: <0.003 mm
+  * Search directions: ±X, ±Y, -Z
+  * Deflection in XYZ directions: ±2mm
+  * Force to decouple in XY direction: from 0.5 to 2H
+  * Body diameter and length: D=28mm, L=60mm
+  * Base size: 28x28mm
+  * Diameter and height of the ceramic pad: D=10mm, h=2.5mm
+  * Power supply: +5V
+  * Current consumption: >4mA
+  * Features dust and splash protection
+  * Features a brittle safeguard fuse