Differences

This shows you the differences between two versions of the page.

--- quickstart:mycnc-quick-start:installing-iso-sbc-tinkerboard [2019/05/23 11:09] – ivan
+++ quickstart:mycnc-quick-start:installing-iso-sbc-tinkerboard [2019/05/23 11:25] – ivan
@@ Line 32: / Line 32: @@
 After the image file has been flashed onto the microSD card, it can now be inserted ino the TinkerBoard computer to use the myCNC configured Linux system.
+====Setting up TeamViewer on an Asus TinkerBoard SBC====
+In order to set up the TeamViewer application, please follow the instructions below:
+. Double-click the TeamViewer icon on your desktop to open it and select the **Mark Executable** option.
+{{:quickstart:mycnc-quick-start:tinkerboard-teamviewer-001.png}}
+. Click **Accept License Agreement**
+{{:quickstart:mycnc-quick-start:tinkerboard-teamviewer-002.png}}
+. The following window will pop up, notifying you that TeamViewer is not yet accessible. Go to the **Settings** menu (the gear button in the top-right corner).
+{{:quickstart:mycnc-quick-start:tinkerboard-teamviewer-003.png}}
+. Go to **General > Network Settings** and select **accept** in the **Incoming LAN connections** field.
+{{:quickstart:mycnc-quick-start:tinkerboard-teamviewer-005.png}}
+. Go to **Security** and select **Secure (6 characters)** in the **Password strength** field.
+{{:quickstart:mycnc-quick-start:tinkerboard-teamviewer-006.png}}
+. Click **OK**. The TeamViewer ID and password should now appear on the main screen of the TeamViewer application, and the setup should be complete.