Differences

This shows you the differences between two versions of the page.

--- quickstart:mycnc-quick-start:dxf-import [2019/07/05 13:54] – ivan
+++ quickstart:mycnc-quick-start:dxf-import [2020/01/31 13:25] – ivan
@@ Line 1: / Line 1: @@
 =====Importing DXF files into myCNC=====
-The following manual is designed to give the reader a quick introduction on importing DXF files into myCNC software to convert to G-Code.
+The following manual is designed to give the reader a quick introduction on importing DXF files into myCNC software to convert to G-Code. Note that the DXF import window allows the user to combine different technologies, provided that their tool paths have been drawn in different layers (DXF files) or in different pens/colours (HPGL files). That will allow to assign a particular technology to each such layer/pen (for example, using a spindle or a marker alongside a tangential knife). The myCNC software will automatically add all the necessary tool change and tool lift macros when generating the G-code file from the imported drawing.
 Upon pressing the **Open DXF** file and navigating to the particular file you would like to open, the following window is shown: