Differences

This shows you the differences between two versions of the page.

--- other:importing-essi-files [2019/05/30 13:28] – ivan
+++ other:importing-essi-files [2019/05/31 09:22] (current) – ivan
@@ Line 1: / Line 1: @@
-=====Importing ESSI/mpg files into myCNC=====
+=====Working with AJAN CAM software=====
 ====Creating the CAD/CAM file====
@@ Line 62: / Line 62: @@
 ====Importing the file into myCNC====
-The mpg import support is not included natively with myCNC. However, the import can be performed upon request by converting the file on the myCNC servers. In order to do so, please do the following:
+The mpg import support is not included natively with myCNC. However, the import can be performed upon request. In order to do so, please do the following:
+. Go to **CNC Settings > Support** and copy your Controller UID:
+{{:other:ajan-cam-setup-001.png}}
+. Send an email to **sale@pv-automation.com** which includes your Controller UID and your request for a CAM code.
+. After you have received your CAM code, go to **CNC Settings > Config > G-Codes Settings** and paste it into the **CAM Code** field.
+{{:other:ajan-cam-setup-002.png}}
+. Go to **CNC Settings > Config > Preferences > Common** and check that the **mpg** extension is listed in the NC code filename extensions field. If it is not included, type it in.
+{{:other:ajan-cam-setup-003.png}}
+. Open your .mpg file by clicking the DXF button on the main software screen and then selecting your chosen file.
+{{:other:ajan-cam-setup-v3-001.png}}
+{{:other:ajan-setup-005.png}}
+The .mpg file should now be open in myCNC software and ready to be used.
-. Go to **CNC Settings > Support** and copy your User ID.