Action unknown: siteexport_addpage
mycnc:touch_screen_calibration_for_tinkerboard_xfce_window_manager
Touch Screen Calibration for TinkerBoard SBC
1. Open Konsole (Click on Konsole Desktop shortcut or select Menu → Application → Terminal Emulator)
2. Run xinput_calibrator in the konsole. Type in the konsole
xinput_calibrator
3. Follow instructions and Tap the red crosses to make calibration. After calibration done the xinput_calibrator will offer new calibration data to add to the system calibration settings
Calibration settings should be saved into file /etc/X11/xorg.conf.d/99-calibration.conf
4. Open new konsole window. Open file /etc/X11/xorg.conf.d/99-calibration.conf with administrator permissions from Editor.
sudo mcedit /etc/X11/xorg.conf.d/99-calibration.conf
5. Copy Calibration settings from xinput_calibrator output to the Editor window.
5. Press F2, Enter to save the settings. Reboot computer to aplly the changes.
mycnc/touch_screen_calibration_for_tinkerboard_xfce_window_manager.txt · Last modified: 2018/05/11 12:22 by skirillov