Differences

This shows you the differences between two versions of the page.

--- mycnc:server_api [2019/10/22 12:42] – ivan
+++ mycnc:server_api [2022/02/15 10:38] – ivan
@@ Line 1: / Line 1: @@
 ====== Server API ======
-This article serves as the main reference point for all myCNC material related to the myCNC Server API. It will be expanded at a full manual.
+//This article serves as the main reference point for all myCNC material related to the myCNC Server API.//
-The server API allows to control movement and machine coordinates remotely, via a series of commands. A list of such commands is presented below for jog control, etc.
+The server API allows to control movement and machine coordinates remotely, via a series of commands.
+To enable Server API functionality, first head into your Settings > Config > Network, and enable the ''Server Interface'' option, as well as set a ''Server Port'' (the server port will be used to connect to your system via the ''telnet'' command, for example ''telnet 127.0.0.1 4266''):
+{{:mycnc:server-api-002-network-tab.png}}
+A list of Server API commands is presented below for jog control, etc. To obtain a full list of commands, type ? while connected to the remote host:
+{{:mycnc:server-api-001-commands-list.png}}
+A full list of commands is provided below:
+^ Parameter ^ Description ^
+| EchoMode |  |
+| ProgramFileOpen |  |
+| ProgramBegin |
+| ProgramAppend |
+| ProgrmaEnd |
+| ProgramPlay | Starts running the program |
+| ProgramPlayBack |
+| ProgramPlayStep |
+| ProgramPlayStepBack |
+| ProgramPause |
+| ProgramStop | Stops the running program |
+| ProgramReset | Resets the program to the beginning |
+| GetEstimateTime |
+| GetMachinePosition | Returns all of the current machine position coordinates |
+| GetProcess |
+| GetWorkPosition | Returns all of the current work (program) coordinates |
+| GetMyCNCVersion |
+| GetFVariable | Returns the value stored in a global variable (as double) |
+| GetIVariable | Returns the value stored in a global variable (as int) |
+| GetReady |
+| LineAppend |
+| GetScanData |
+| GetSensors |
+| GetMCC | Get Motion Control Code - read machine status, returns a number (for example, 3) |
+| GetMCPtr | Get Motion Control Pointers |
+| GetHW |
+| GetHWDAC |
+| GetHWADC |
+| GetHWInputBit | Returns (reads) the state of a particular input |
+| GetHWInputs | Returns (reads) the state of an input group |
+| GetHWOutputs |
+| GetHWPWM |
+| GetPWMs |
+| GetPausedLine |
+| GetLastMessage |
+| GetWorkState |
+| PendantWidgetShow |
+| PendantWidgetHide |
+| PendantWidgetHidden |
+| RunPLC |
+| SaveConfig |
+| SetG92 | Sets the current work position to the selected value (for example, ''SetG92 X0'') |
+| SetHWDAC |
+| SetHWOutputBit |
+| SetHWPWM |
+| SetPendant |
+| SetRotationAngle |
+| SetCNCVariable |
+| SetJog |
+| SetScale |
+| SetGVariable |
+| SinglePlay |
+| ShutDown |
 ====Server API, Jog control====