myCNC is multi-tasking and multi-platform CNC Control Software working under MS Windows (7, 8, 10), Linux, Embedded Linux Operating systems. myCNC can be run on Desktop PC, Industrial PC, Laptop or Single Board Computer (SBC) like Raspberry Pi 2/3, Odroid-C2/XU4, Asus Tinker Board, Rock64, Cubieboard2 and some others.
myCNC Control features
ATC (Automatic Tool Change) is supported for any myCNC control board. myCNC contains Macro Wizard to generate Tool change macros for different kind of Tool changers (linear, drum/rotary, chain)
Multi-Tool support. If several tools is installed on machine head myCNC control software can handle switching tools procedure and apply tool offsets just like standard M6/Tool change procedure
Laser Strength Control. myCNC software allows the user to adjust the laser strength depending on the speed with which the laser beam is moving across the surface of the material. This is highly useful to eliminate overheating from the laser beam that would otherwise occur at corners and parts of the program where the beam slows down.
Wireless Pendant control support. myCNC supports a number of Wireless Pendant Controls
Flycut process allows to go through the laser cutting/engraving process much faster than the conventional setup when thin materials are used. The flycut process can maintain precision up to a 0.1 mm at working speeds up to 100 meters/minute by syncing the laser cutting/movement processes. The M64/M65 codes turn the corresponding exit ON and OFF, while M164/M165 allow for on-the-fly pulse-width modulation.
Advanced 2D/3D visualization, real-time IO monitoring,
Row and Column Nesting. myCNC able to multiply g-code file by given number along X and Y axes.
Tool Radius Compensation with visualization. myCNC does Tool Radius compensation according G40-G42 codes and Tool Table and able to show results on Visualization widget to visual control.