===== Touch Screen Calibration for TinkerBoard SBC =====
1. Open **Konsole** (Click on **Konsole** Desktop shortcut or select Menu -> Application -> Terminal Emulator)
{{tinker:mycnc-tinker--11.png}}
{{tinker:mycnc-tinker--12.png}}
2. Run **xinput_calibrator** in the konsole. Type in the konsole
xinput_calibrator
and press Enter.
{{tinker:mycnc-tinker--19.png}}
{{tinker:mycnc-tinker--20.png}}
3. Follow instructions and Tap the red crosses to make calibration. After calibration done the **xinput_calibrator** will offer new calibration data to add to the system calibration settings
{{tinker:mycnc-tinker--22.png}}
Calibration settings should be saved into file **/etc/X11/xorg.conf.d/99-calibration.conf**
4. Open new konsole window. Open file **/etc/X11/xorg.conf.d/99-calibration.conf** with administrator permissions from Editor. sudo mcedit /etc/X11/xorg.conf.d/99-calibration.conf
{{tinker:mycnc-tinker--23.png}}
{{tinker:mycnc-tinker--24.png}}
5. Copy Calibration settings from **xinput_calibrator** output to the Editor window.
{{tinker:mycnc-tinker--25.png}}
5. Press **F2**, **Enter** to save the settings. Reboot computer to aplly the changes.
{{tinker:mycnc-tinker--26.png}}