====== Change IP Address of myCNC control board ======
{{youtube>mCahGVvQ_Tw?large}}
//NOTE: Most modern myCNC control boards (past 2017) have the default IP address of 192.168.4.78.//
1. Connect Host Computer with myCNC controller with USB cable.
2. Open Console window on Host Computer. If you have ARM (Odroid-C2/Raspberry/NanoPi-K2) Single Board Computer (SBC) purchased from us, click on **Terminal MATE** icon on Desktop
{{mycnc:mycnc-terminal.png}}
3. Run "minicom" software (for ARM(Odroid-C2)/Desktop Linux)
minicom -D /dev/ttyUSB0
{{minicom-x.png}}
4. Run command in terminal window to change IP address #SLA 192 168 0 78
to change IP address to 192.168.0.78. Controller will reply CMD: #SLA 192 168 0 78
{{minicom-x-1.png}}
5. If success, controller will reply with message IP: 192.168.000.078
{{minicom-x-2.png}}
6. Close Terminal Window.